Bending Notes
The use of bent notes is one of the great sounds of lead guitar. Bending between notes originally came from the Blues, with players imitating the sound of a human voice. The technique is now used in almost every style of guitar playing. A bend is achieved by 'pushing' a string with the left hand fingers across the fretboard towards the adjacent strings. This causes the note to rise in pitch. Notes are most commonly bent one tone (2 frets in pitch) or one semitone (1 fret). The examples below use the third finger to bend the notes. You will find bending easier if the second finger also helps "push up〃（bend) the string. The bend is indicated in tablature by a curved arrow and the letter B above it. In music notation a slur is used to connect the bent notes, so you will need to refer to the letter B above the tab.
In the following example, the C note on the 5th fret of the 3rd string is bent up a tone to a note equivalent to the D note on the 7th fret. Experience and practice will help you bend to the correct pitch. If you use reasonably light guage strings on your guitar, bending will be easier.
The common notes to bend within pattern 1 extension are shown in the following example, which uses notes from pattern 1 at the 5th Fret. The diagram also shows which direction to bend each note. When improvising, you should bend from and to a note in the pattern.
This one uses the technique of barring and rolling the first finger across the first 3 strings. Practice it slowly until you can do it easily.
